The Heat Moist Exchanger -HME Filter
The HME filter comes with the sterile and clean, which is ready to use
Do not use, if the package has been opened or damaged in any case
Indication
The material is designed and manufactured for a single use device that must use only on one patient
Filter placement at the patient side between the tracheal tube and breathing circuit in the positions.
Adult patient
Pediatric patients
Neonatal patients
Types of HME Filter
Adult large HME
Pediatric small HME
Infant electrostatic filter HME
Neonatal electrostatic filter HME
The HME filter protects the patient, equipment and healthcare workers from the cross contamination
It maintains the heat and moisture loss from the airway.
Parts of the material consist of a patient end and machine end.
Some of the HME will have a Luer-lock connector for the co2 sampling/monitoring.
Close the Luer lock connector, when not in use. If you fail to close the Luer lock connector the circuit will have leak and patients saturation down and pressure also reduces.
Luer lock connector present in adults and Paediatrics.
The Luer lock connector absents infants and neonatal electrostatic HME filter.
Use of the HME vary in use, list of places and equipment used as follows
- Anesthesia workstation- closed breathing circuits
- Ventilator closed circuits
- Transport Ventilator
- Physiotherapy respiratory machine
- CPAP and BIPAP machine
Contraindication
Do not use the device in conjunction with heated humidifier or nebulizers
Do not use apart from the indicated medical equipment.
Direction to use
Remove the filter from the sterile protective pack
Connect the device to the breathing circuit with sterile.
Check all the connection with an airtight seal
Adjust the tidal volume to compensate for dead space.
For co2 monitoring attach the monitoring sampling line to Luer lock connector if needed.
Periodically check the device to the breathing circuits for any resistance to flow.
Resistance found on the circuit change the device if needed.
The fluid accumulation may block or create resistance on the breathing circuit.
The material should be discarded after use as per the biomedical waste management protocol
Single-use and sterile pack
The maximum duration to use 24 hours.
If pack found damaged, do not use it.
Precaution
Do not try to reuse or reserialization of this product.
Ensure the patency of the device, before use.
Try to avoid in the patient with low tidal volume as indicated on the table.
Adjust the tidal volume according to the dead space of HME filter
Use only threaded or non-threaded co2 sample line as per the HME Luer lock connector.